Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Teshigawara, Makoto; Harada, Masahide; Saito, Shigeru; Oikawa, Kenichi; Maekawa, Fujio; Futakawa, Masatoshi; Kikuchi, Kenji; Kato, Takashi; Ikeda, Yujiro; Naoe, Takashi*; et al.
Journal of Nuclear Materials, 356(1-3), p.300 - 307, 2006/09
Times Cited Count：9 Percentile：53.29(Materials Science, Multidisciplinary)We adopted silver-indium-cadmium (Ag-In-Cd) alloy as a material of decoupler for decoupled moderator in JSNS. However, from the heat removal and corrosion protection points of view, the Ag-In-Cd alloy is needed to clad between Al alloys (Al5083). We attempted to obtain good bonding conditions for between Al5083 and ternary Ag-In-Cd alloys by HIPing tests. The good HIP condition was found for small test piece (
20mm). Though a hardened layer due to the formation of AlAg
was found in the bonding layer, the rupture strength of the bonding layer was more than 20 MPa, which was the calculated design stress. Bonding tests of a large size piece (200
20030 mm
), which simulated the real scale, were also performed according to the results of small size tests. The result also gave good bonding and enough required-mechanical-strength, however the rupture strength of the large size test was smaller than that of small one.
Harada, Masahide; Watanabe, Noboru; Teshigawara, Makoto; Kai, Tetsuya; Maekawa, Fujio; Kato, Takashi; Ikeda, Yujiro
LA-UR-06-3904, Vol.2, p.700 - 709, 2006/06
Pulse characteristics data for every neutron beam line are indispensable in designing devices for neutron scattering experiments of JSNS. A detailed model was built and pulse characteristics of each beam line were estimated using the PHITS code and the MCNP-4C code. These results have been disclosed on the J-PARC homepage since September 2004. Due to changes of moderator shapes in a progress of manufacture design, we observed from the calculation that pulse structures of decoupled moderators were deteriorated, especially, those of pulse tail. We found that this deterioration was caused by leakage neutron from gaps between decouplers and absorbing liners of the reflector. For a final stage of the manufacture design, we carefully tried to find other factors which deteriorated the pulse characteristics. Furthermore, pulse structures of poisoned and unpoisoned decoupled moderators were evaluated with the consideration of heterogeneous burn-up and leakage neutron spectra including high-energy region up to GeV were estimated for each neutron beam hole.
Harada, Masahide; Watanabe, Noboru; Teshigawara, Makoto; Kai, Tetsuya; Ikeda, Yujiro
Nuclear Instruments and Methods in Physics Research A, 539(1-2), p.345 - 362, 2005/02
Times Cited Count：21 Percentile：78.97(Instruments & Instrumentation)Neutronic studies of decoupled hydrogen moderators were performed by calculations taking into account para hydrogen content, decoupling energy, moderator dimensions/shapes and reflector material. Low-energy parts of calculated spectral intensities with different para hydrogen contents were analyzed by a modified Maxwell function to characterize neutron spectra. The result shows that a 100% para hydrogen moderator gives the highest pulse peak intensity together with the narrowest pulse width and the shortest decay times. Pulse broadening with a reflector was explained by time distributions of source neutrons entering into the moderator through a decoupler. Material dependence of time distribution was studied. A decoupling energy higher than 1 eV does not bring about a large improvement in pulse widths and decay times, even at a large penalty in the peak intensity. The optimal moderator thickness was also discussed for a rectangular parallelepiped shape and a canteen shape moderators.
Tamura, Itaru; Aizawa, Kazuya; Harada, Masahide; Shibata, Kaoru; Maekawa, Fujio; Soyama, Kazuhiko; Arai, Masatoshi
Proceedings of ICANS-XVI, Volume 1, p.529 - 539, 2003/07
Moderator components of the McStas code have been created for the design of the spectrometers of JSNS. Three cryogenic moderators are adopted in JSNS, One is a coupled H moderator for high intensity experiments and other two are decoupled H with poisoned or unpoisoned for high resolution moderators. Monte Carlo simulations have turned out to be useful for design of neutron scattering instruments with high complexity. The software package McStas is selected for its own flexibility. Since the characteristics of neutron beams generated from moderators make influence on the performance of pulse neutron spectrometers, it is important to perform the simulation with neutron source component written precisely. Both Energy dependence of neutron spectrum and time structure of neutrons were calculated using NMTC/JAERI97 and MCNP4a codes.The simulation parameters, which describe the pulse shape as a function of time, are optimized. The creation of neutron source components viewed to coupled H moderator and viewed to decoupled H moderator of JSNS are reported.
Harada, Masahide; Teshigawara, Makoto; Watanabe, Noboru; Kai, Tetsuya; Ikeda, Yujiro
Proceedings of ICANS-XVI, Volume 2, p.697 - 706, 2003/07
For two decoupled moderators in JSNS, optimization studies were performed by model calculations using NMTC/JAM and MCNP-4C codes. The model was based on a realistic Target-Moderator-Reflector Assembly. We assumed a para-hydrogen ratio of 100%. The shape of poisoned and unpoisoned moderators is a canteen type with dimensions of 13
12
6.2
cm
. A decoupling energy of about 1 eV was adopted to meet the user's requests. As a decoupler material we selected silver-indium-cadmium alloy. It was found that for the decoupled moderators, especially the poisoned moderator, pulse broadening due to a finite beam-extraction angle (
) was very serious. Therefore, for the poisoned and the unpoisoned moderators were limited to be 7.5
and 17.5, respectively. Cadmium (Cd) was selected as a poison material due to higher cut-off energy than gadolinium and higher peak intensity with narrower pulse width. The poison plate will be placed at 25 mm from the viewed surface which meets the user's requirements.
Tamura, Itaru; Aizawa, Kazuya; Harada, Masahide; Shibata, Kaoru; Maekawa, Fujio; Soyama, Kazuhiko; Arai, Masatoshi
JAERI-Research 2003-008, 34 Pages, 2003/03
JAERI-Research-2003-008.pdf:1.62MB
Moderators components of the McStas code have been created for the design of JSNS instruments. Three cryogenic moderators are adopted in JSNS, One is coupled H moderators for high intensity experiments and other two are decoupled H with poisoned or unpoisoned for high resolution moderators. Since the characteristics of neutron beams generated from moderators make influence on the performance of pulse neutron spectrometers, it is important to perform the Monte Carlo simulation with neutron source component written recisely. The neutron spectrum and time structure were calculated using NMTC/JAERI97 and MCNP4a codes. The simulation parameters, which describe the pulse shape over entire spectrum as a function of time, are optimized. In this paper, the creation of neutron source components for port No.16 viewed to coupled H moderator and for port No.11 viewed to decoupled H moderator of JSNS are reported.
Harada, Masahide; Teshigawara, Makoto; Kai, Tetsuya; Sakata, Hideaki*; Watanabe, Noboru; Ikeda, Yujiro
Journal of Nuclear Science and Technology, 39(8), p.827 - 837, 2002/08
Times Cited Count：18 Percentile：73.17(Nuclear Science & Technology)For a decoupled hydrogen (super critical) moderator, optimization studies have been performed on a premoderator and reflector material (Pb, Be, Fe and Hg) together with the decoupling energy to realize a higher neutronic performance. The result indicated that the best neutronic performance could be obtained for a decoupled H
moderator in a Pb reflector by optimizing the premoderator and adopting an appropriate decoupling energy, even compared with optimized one in a Be reflector.
Harada, Masahide; Teshigawara, Makoto; Kai, Tetsuya; Sakata, Hideaki*; Watanabe, Noboru; Ikeda, Yujiro
JAERI-Research 2001-016, 32 Pages, 2001/03
JAERI-Research-2001-016.pdf:1.74MB
An optimization study on the premoderator, the reflector material choice and a length of the liner is carried out for the design of high performance decoupled hydrogen moderator. NMTC/JAM and MCNP-4C are used for the neutronics calculation. The result indicates that, assuming premoderator dimensions and decoupling energy is controlled, the decoupled hydrogen moderator with a premoderator can provide better pulse characteristics than that without the premoderator for a Be reflector. On the selection of the reflector material, it is clearly shown that Pb and Hg reflectors give merits in using the premoderator for higher intensity and reduction of energy deposition in moderator. It is also shown that a H2O premoderator provides a short tail while a D2O premoderator provides the high peak intensity. Minimum liner length is evaluated to be 20 cm from the viewpoint of neutronics.
